Car Repair Techniques Range Rover 3

General recommendations when performing locksmith work
Removing components Before removing a component, clean the installation site. Close the holes created when the component was removed with process plugs. To prevent fluid from escaping and foreign...

Ball and roller bearings
General remarks When removing and installing rolling bearings, follow the instructions listed below. This is a guarantee of reliable and durable operation. Wash the bearing thoroughly. All traces of...

Oil seals
General remarks Always change oil seals (cuffs) to new ones in case of dismantling the seal (when only the seal was dismantled and when the seal was dismantled as part of an assembly unit). NEVER...

Joints and joint surfaces
General remarks When assembling, mating joints must be dry, unless the condition of the joint surfaces during assembly is specifically indicated. When assembling, install only the gaskets provided...

Details protecting threaded connections from loosening
General remarks Always replace the locking devices with absolutely identical ones. Retractable tab washers Always replace the flap washers with new ones when reassembling. Do not reuse these lock...

Parallel Thread Parts
General remarks Vehicles use parts with metric threads in accordance with ISO standards. Nuts, bolts and screws with damaged threads must be replaced with new ones. Driving a damaged thread with a...

Designations of bolts and nuts
Bolt designations Most of the nuts and bolts used in the New Range Rover are replaced with new ones after they have been loosened or loosened. Detailed information is provided in the relevant...

Flexible pipes and hoses
General remarks When removing and installing flexible pipes and hoses, follow the instructions below. This is a guarantee of reliable and durable operation. Before removing the brake hoses or power...

Using roller stands to determine the braking forces
General remarks PLEASE NOTE: If possible, use a roller stand to test the braking forces of all four wheels at the same time. Stand for simultaneous testing of the braking forces of all four wheels...

Replacing SRS System Components After Operation
The information below contains instructions for replacing SRS components, both as a result of a collision with the vehicle and as a result of its natural aging. WARNING: All components of the SRS...

Body repair
General remarks Unlike the previous Range Rovers model with a body bolted to the base frame, the new Range Rovers model has a load-bearing body. The new load-bearing body structure significantly...

Car body lift
The following instructions must be observed when lifting the vehicle. Raise the vehicle only on a level and firm surface. Apply the parking brake. Move the automatic transmission selector to position...

Towing a car
The car has a permanent drive on all four wheels. When towing a disabled vehicle, strictly follow these instructions: Towing a car on a rigid or flexible hitch with a working brake system and...

Car transportation
Transportation by road Eyelets for attaching the cable are available at the front and rear of the vehicle. Do not use any other vehicle components to secure trailer arms. Position the vehicle in its...