Front seat anchors
1. Check that the seats are securely fastened to the floor of the body and do not have the possibility of even small movements.
Front rear seat mounts
2. Check that the rear seat is securely fastened to the floor of the body and does not have the possibility of even small movements.
Rear seat mountings
3. Release latch and fold each rear seat fully forward. Make sure the rear seat anchors are securely fixed to the floor and have no play.
4. Check up, that locks of clamps are reliably fastened to a floor of a body and have no backlashes.
5. Check the operation of the seat adjustments.
6. Fully extend the seat belt and allow it to retract under the action of the retractor. Repeat the test for other seat belts.
7. Check the condition of the webbing along the entire length, paying attention to wear and damage. Repeat the test for other seat belts.
8. Check up reliability of the top fastenings of seat belts.
9. Verify that the adjustment mechanism for the position of the upper bracket of the shoulder strap attachment is working properly.
10. Check up reliability of fastenings of locks of seat belts.
11. Attach each strap to your lock, check the connection of the lock plate with the lock. Release the belt buckle and check that the belt works properly.
Comments on this article