Fuel injection system of Td6 engine
| Type | System "Common rail" with highways (subsystems) high and low pressure |
| High pressure pump | It is driven by a chain from the crankshaft of the engine. |
| Pressure developed by the high pressure pump: | |
| Low pressure | 1.5...5.0 bar (21.75...72.5 psi) |
| High pressure | 200...1350 bar (2900...19575 psi) |
| Fuel priming pump located in the fuel tank | Motor Driven |
| Auxiliary priming pump | Built into the fuel line, electrically driven, located on the side of the fuel tank |
| Fuel pressure sensor in the accumulator | Located at the end of the battery |
| nozzles | Electronic nozzles |
| Fuel filter | Full flow, with replaceable filter element and integrated fuel pressure sensor |
V8 engine power system
| Type | Distributed petrol injection system |
| Fuel pump | Driven by an electric motor. Located in the fuel tank. |
| System pressure | 3.5 bar (50.75 pounds per square inch) |
| Maximum feed | 170 liters per hour (211 pints per hour) (234 US pints per hour) |
| nozzles | Electronic nozzles |
| Fuel filter | Built into the fuel line |
Comments on this article