Control Panel Center Fans (Range Rover 3)

Dismantling

1. Loosen the 4 inner latches securing the ventilation grille to the control panel trim one by one. To do this, apply uniform force to it until the last latch is released.



2. Disconnect the connector blocks and separate the cables from the grille assembly.

3. Release the air distributor cables.

from the ratchet assembly and remove the ventilation grille.

NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.

4. Remove the alarm switch.

Assembly

1. Install the hazard switch.

2. Position the ventilation grille assembly on the control panel and secure the cable.

3. Attach the cable lugs and secure the cables to the grille.

4. Install and secure the ventilation grille assembly to the control panel trim.