Car entertainment system Range Rover 3

Removal and installation of the radio receiver
Removing 1. Remove the hatch located in a luggage carrier on the left side. 2. Remove the cover of the box located in the trunk on the left side. 3. Raise and secure the spare wheel cover. 4. Remove...

Speaker grille in front doors
Removing 1. Remove the front door panel. DOORS, REPAIR WORKS, Door panel - front door. 2. Remove the 11 plastic rivet heads. 3. Using a drift, remove and destroy the speaker grille. 4. Remove flash...

Front door speakers
Removing 1. Remove the front door panel. DOORS, REPAIR WORKS, Door panel - front door. 2. Remove the speaker wiring harness installed in the front door. 3. Disconnect the block from the speaker. 4....

Speaker installed in the control panel
Removing 1. Carefully release the speaker grille from the control panel cover. 2. Remove the 4 Torx screws securing the speaker to the panel. 3. Release the speaker from the mount and disconnect the...

Cassette/CD player
Removing 1. Remove the information display. NAVIGATION AND ON-BOARD ENTERTAINMENT, REPAIRS, Main unit - information display. 2. Loosen the 2 screws securing the cassette/CD player and remove it....

Removal and installation of the amplifier
Removing 1. Remove the hatch located in a luggage carrier on the left side. 2. Remove the cover of the box located in the trunk on the left side. 3. Raise and secure the spare wheel cover. 4. Remove...

Information display main unit
Removing 1. Remove the control panel cover. CAR INTERIOR PARTS, REPAIR WORKS, Upper panel - control panel. 2. Remove the 6 Torx screws securing the information display housing to the console. 3....

Navigation system computer
Please read the section carefully before disconnecting the battery "Disconnecting the battery" and follow all the instructions there. GENERAL INFORMATION, Precautions when working with electrical...

Antenna signal booster
Removing 1. Remove the hatch located in a luggage carrier on the left side. 2. Disconnect the block from the amplifier. 3. Disconnect the coaxial cable. 4. Loosen the nut and disconnect the coax...

Phone antenna
Removing 1. Remove the hatch located in a luggage carrier on the left side. 2. Remove the 2 antenna mounting nuts and release the antenna. 3. Disconnect the block and remove the antenna. Installation...

Telephone Electronic Control Unit (TCU)
If you need to replace the electronic control unit, then before disconnecting the battery, you must connect the Testbook / T4 and follow the recommended steps. Removing 1. Remove the hatch located in...

Electronic voice recognition unit
If the voice recognition ECU needs to be replaced, connect the /T4 diagnostic tool and follow the recommended steps before disconnecting the battery. Removing 1. Remove the hatch located in a luggage...

TV signal amplifier on the left side
Removing 1. Remove the hatch located in a luggage carrier on the left side. 2. Disconnect the coaxial cable. 3. Loosen the Torx screw securing the amplifier. 4. Disconnect the block and remove the...

TV signal amplifier on the right side
Removing 1. Remove the hatch located in a luggage compartment on the right side. 2. Disconnect the coaxial wire. 3. Loosen the Torx screw securing the antenna amplifier. 4. Disconnect the block and...

Amplifier (antenna and TV) and auxiliary heater
Removing 1. Remove the hatch located in a luggage carrier on the right side. 2. Disconnect the coaxial cable. 3. For vehicles with auxiliary heater: Disconnect the auxiliary heater receiver coaxial...

Electronic video signal modulation unit
Removing 1. Remove the hatch located in a luggage carrier on the left side. 2. Disconnect 2 blocks from the electronic block of video signal modulation. 3. Mark the location and disconnect the 2 coax...