Rear combination lamp (Range Rover 3)

Removing

1. Open the top and bottom of the tailgate.



2. Remove 2 screws securing the flashlight to the housing.

3. Release the lamp from the mounts and move it in a horizontal direction. Disconnect the block and remove the lamp.

CAUTION: Always be careful not to damage paintwork or glass when removing panel trim.

4. Loosen the fastener and remove the lamp socket from the lantern.

5. Remove the lamp from the socket.

NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.

6. Remove the remaining bulbs from the socket.

7. Disconnect the LED block from the socket.

Installation

1. Attach the LED block to the socket.

2. Install the lamps in the sockets.

3. Install the lamp and socket in the lantern.

4. Attach the block to the lantern.

5. Install and secure the lantern.