Xenon headlight gas discharge control unit (Range Rover 3)

Removing

1. Remove the headlamp assembly.

LIGHTING, REPAIR WORKS, Headlight assembly.

2. Remove the 3 Torx screws securing the control box to the headlight housing.

3. Disconnect block from a headlight and remove the control unit.

Installation

1. Clean the headlight housing at the connection point of the control unit block.

2. Install the control box on the headlight housing and tighten the Torx screws.

3. Install the headlamp assembly.

LIGHTING, REPAIR WORKS, Headlight assembly.