Front seat rear panel (with adjustable upper backrest) (Range Rover 3)

Dismantling

1. Remove the seat assembly.

SEATS, REPAIRS, Front seat.

2. Release the 3 tensioner straps of the seat back panel under the seat.



3. Turn out 2 screws of fastening of the lower decorative overlay of a back.

4. Release the trim from the 6 clips and remove it.



5. Disconnect 2 cords of a tension of the top part of an upholstery of a back of a seat.

6. Release the tape "Velcro" back upholstery fixings.



7. Remove the trim from the back upholstery trim.

8. Release the pad from 4 latches and remove the back panel of the backrest.

Assembly

1. Install the upper backrest upholstery and secure it with the clips.

2. Attach the backrest trim to the trim.

3. Clip "Velcro" back upholstery.

4. Attach 2 seat back upholstery tension cords.

5. Install the bottom trim and secure it with the clips.

6. Wrap screws of fastening of the bottom overlay of a back.

7. Attach the tension straps of the back panel to the latches on the bottom of the seat.

8. Install the seat in the car.

SEATS, REPAIRS, Front seat.