Rear seat back pad (Range Rover 3)

Dismantling

1. Fold the rear seat forward.

2. Release the 3 seat lock trim tabs and remove the trim.



3. Turn out 2 screws of fastening of the lower decorative overlay of a back.

4. Release the 3 latches of the seat back pad and remove the pad.



5. Carefully release the backrest trim from the top of the backrest frame and remove the trim.



6. Free "Velcro" to access the screw that secures the armrest to the seatback corner trim and remove the screw.

7. Carefully release the 11 clips securing the rear armrest pad to the front pad and remove the pad.

8. Carefully pry up the back of the pad with a lever, releasing it from the adhesive layer.

9. Remove the trim from the seat back.

Assembly

1. Apply a suitable adhesive to the overlay.

2. Install and fix the trim on the seatback.

3. Install the rear armrest pad and secure it with the clips.

4. Screw in the rear armrest pad fixing screw and fasten "Velcro".

5. Position and secure the top trim to the seatback frame.

6. Establish a back lower overlay of a back of a seat and fix it with clamps.

7. Wrap screws of fastening of the bottom overlay of a back.

8. Establish an overlay of the lock of a back of a seat and fix it with clips.

9. Set the seat to its original position.