Rear overhead console (Range Rover 3)

Dismantling

1. Carefully separate the rear console from the ceiling panel.

2. Disconnect block from a plafond of illumination of salon.

3. Disconnect the block from the ultrasonic sensor of the security alarm system and remove the console assembly.

NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.

4. Carefully release and remove the ultrasonic transducer and module.

5. Remove the dome light from the console.

Assembly

1. Install the cover in the console.

2. Install the volume control module and probe into the console.

3. While holding the console, attach the wire blocks.

4. Install the rear console to the ceiling panel.