Dismantling
1. Carefully release the 7 clips securing the tailgate trim to the body. Remove the decorative trim.
WARNING: Always take care not to damage the paintwork and glass when removing panel trim.
NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.
2. Remove the 7 clips from the tailgate lining.
3. Mark the position of the 4 adhesive retainers on the pad, remove them and discard.
Assembly
1. Install the adhesive retainers on the overlay at the previously marked locations.
2. Install the rest of the clips on the trim.
3. Clean the tailgate to remove adhesive residue.
4. Remove the protective tape from the adhesive clips, apply the overlay to the tailgate and secure the clips. Check that the adhesive retainers are pressed correctly.
Comments on this article