Car engine starting system Land Rover Freelander 2

Launch system specification
General specification Position Specification Starter: Model Bosch Type 2.0 kW Voltage 12 Torque Specifications Description Nm lb-ft Solenoid terminal built-in connector nut 6 4 Starter positive...

Description and principle of operation
Pos. spare part no Name 1 - Starter 2 - Connecting the battery to the electromagnet 3 - Positive battery connection The starter is rated at 2.0kW and is manufactured by Denso as a sealed gear only...

Removal and installation of a starter
Removing 1. Disconnect a wire of weight from the accumulator. Refer to procedure: Specifications (414-00 Charging system - General information, Specifications). 2. Remove the engine cover. Refer to...
There is 1 a comment

Starter solenoid
Removing 1. Remove the starter. Refer to procedure: Starter (303-06B Starting system - 2.2L Duratorq - Td4, Removal and installation). 2. Tightening torque: 10 Nm 3. Tightening torque: 10 Nm 4....

Starter control module
Removing 1. Using the Land Rover approved diagnostic system, check the launch control module and upload the saved data. NOTE: This step must be performed if the launch control module has been...

Automatic stop/start system
Pos. spare part no Name 1 - Voltage quality control module 2 - Battery monitoring system module 3 - AGM battery (with absorbent glass microfibre baffles) 4 - Neutral sensor 5 - Starter 6 - Auxiliary...

Stop/Start Information Panel
Several informational messages have been added to notify the driver of the system status "Stop/Start". The instrument panel receives information panel data from the ECM via the CJB on the medium...

Reliability of stop/start system
The operating engine settings have been preserved, and in some cases improved, to provide almost imperceptible switching off and on of the engine in a cycle for passengers "Stop/Start". To reduce...

Stop/Start Control Scheme
New software has been added to the ECM that controls the operation of the automatic system "Stop/Start", because in addition to its own components, the automatic system "Stop/Start" connected to many...

Stop/Start Technology
The new and upgraded components described in this section ensure virtually uninterrupted operation of all vehicle systems in a cycle "Stop/Start". Voltage quality control unit During the cycle...

Stop interlocks, activators and start interlocks
To work the system "Stop/Start" may be affected by various selectable functions or driving situations. Depending on the specific circumstances, they may: prevent engine shutdown (stop interlock)...