Glow plug DTC indicator (Freelander 2)

NOTE: If a control module or component is suspected and the vehicle continues to be covered by the manufacturer's warranty, refer to the warranty manual before installing a new module/component (subsection B1.2), or determine if there is any previously approved special program in operation.

NOTE: Universal Scan Tools cannot read the listed codes or can only read 5-digit codes. Match the 5 digits from the scan tool with the first 5 digits of the listed 7 digit code to identify the problem (the last 2 digits give additional information read by the diagnostic system approved by the manufacturer).

NOTE: Always use a digital multimeter when performing voltage or resistance tests (DMM) accurate to three decimal places and with a modern calibration certificate. When testing resistance, always consider the resistance of the DMM wires.

NOTE: Before starting diagnostic programs using Pinpoint tests, check and correct basic problems.

NOTE: Inspect the electrical connectors for signs of water intrusion and their pins for damage and/or corrosion.

NOTE: If DTCs are logged and there is no problem after performing Pinpoint tests, an intermittent problem may be the cause. Be sure to check for loose connections and corroded contacts.