Car engine device Land Rover Freelander 2
Engine Specifications 2.2L Duratorq Td4
Lubricants, fluids, sealants and adhesives Description Description and part number T-joints - sealant between ladder structure and engine block Three bond TB 1215J Sealant between oil pan and block...
Lubricants, fluids, sealants and adhesives Description Description and part number T-joints - sealant between ladder structure and engine block Three bond TB 1215J Sealant between oil pan and block...
Description and appearance of the engine
NOTE: Freelander 2 vehicles use the new TD4 diesel engine. This TD4 diesel engine was not previously used by Land Rover and cannot be mistakenly identified with the Td4 diesel engine used in the...
NOTE: Freelander 2 vehicles use the new TD4 diesel engine. This TD4 diesel engine was not previously used by Land Rover and cannot be mistakenly identified with the Td4 diesel engine used in the...
Engine design
Pos. spare part no Name 1 - cylinder head cover 2 - Camshaft cover 3 - cylinder head 4 - Cylinder block 5 - Oil sump housing 6 - oil sump Technical features The TD4 engine has the following key...
Pos. spare part no Name 1 - cylinder head cover 2 - Camshaft cover 3 - cylinder head 4 - Cylinder block 5 - Oil sump housing 6 - oil sump Technical features The TD4 engine has the following key...
Elements of the cylinder block
Pos. spare part no Name 1 - Cylinder head dowel pin (2 pcs.) 2 - Transmission housing dowel pins (2 pcs.) 3 - Rod plug (12 pcs.) 4 - Sealing plug of the main oil gallery (2 pcs.) 5 - Main bearing cap...
Pos. spare part no Name 1 - Cylinder head dowel pin (2 pcs.) 2 - Transmission housing dowel pins (2 pcs.) 3 - Rod plug (12 pcs.) 4 - Sealing plug of the main oil gallery (2 pcs.) 5 - Main bearing cap...
Cylinder block
Pos. spare part no Name A - Front of the engine 1 - Expansion chamber opening 2 - coolant chamber 3 - Hole for supplying oil to the main bearings 4 - Oil filter housing 5 - Double wall (dark areas) 6...
Pos. spare part no Name A - Front of the engine 1 - Expansion chamber opening 2 - coolant chamber 3 - Hole for supplying oil to the main bearings 4 - Oil filter housing 5 - Double wall (dark areas) 6...
Oil nozzles
Pos. spare part no Name A - Front of the engine 1 - Oil nozzle bolt (4 things.) 2 - Oil nozzle (4 things.) Four oil jets are mounted on the left side of the cylinder block, below each cylinder. The...
Pos. spare part no Name A - Front of the engine 1 - Oil nozzle bolt (4 things.) 2 - Oil nozzle (4 things.) Four oil jets are mounted on the left side of the cylinder block, below each cylinder. The...
Crankshaft position sensor
Pos. spare part no Name 1 - CKP sensor 2 - CKP encoder pulse wheel The CKP sensor is mounted at the front of the engine and secured to the cylinder block with a dowel pin and screw. The position of...
Pos. spare part no Name 1 - CKP sensor 2 - CKP encoder pulse wheel The CKP sensor is mounted at the front of the engine and secured to the cylinder block with a dowel pin and screw. The position of...
Starter Location
Pos. spare part no Name 1 - Starter 2 - Connecting the battery to the electromagnet 3 - Positive battery connection The starter is located in the rear left side of the engine, at the junction of the...
Pos. spare part no Name 1 - Starter 2 - Connecting the battery to the electromagnet 3 - Positive battery connection The starter is located in the rear left side of the engine, at the junction of the...
Coolant pump
Pos. spare part no Name 1 - Bolt (7 pcs.) 2 - Pad 3 - coolant pump The centrifugal engine coolant pump is driven directly by the camshaft timing belt. A gasket and 7 bolts secure the pump to the...
Pos. spare part no Name 1 - Bolt (7 pcs.) 2 - Pad 3 - coolant pump The centrifugal engine coolant pump is driven directly by the camshaft timing belt. A gasket and 7 bolts secure the pump to the...
Balancing system
Pos. spare part no Name 1 - Counter-rotating balance shaft 2 - balance shaft 3 - Adjustment plate 4 - Balance shaft housing The balancing system consists of two balancing shafts and is located under...
Pos. spare part no Name 1 - Counter-rotating balance shaft 2 - balance shaft 3 - Adjustment plate 4 - Balance shaft housing The balancing system consists of two balancing shafts and is located under...
Elements of the crankshaft and oil sump
Pos. spare part no Name 1 - Piston ring kit (3 rings per cylinder) 2 - Piston assembly 3 - Connecting rod assembly 4 - The upper loose leaf of the bearing of the lower head of a rod (4 things.) 5 -...
Pos. spare part no Name 1 - Piston ring kit (3 rings per cylinder) 2 - Piston assembly 3 - Connecting rod assembly 4 - The upper loose leaf of the bearing of the lower head of a rod (4 things.) 5 -...
Crankshaft and main bearings
Pos. spare part no Name 1 - Crankshaft 2 - Upper main bearing (4 things.) 3 - Upper thrust washer (2 pcs.) 4 - No. 1 Main Bearing Cap Locating Pin (2 pcs.) 5 - Main bearing cap bolts (10 pieces.) 6 -...
Pos. spare part no Name 1 - Crankshaft 2 - Upper main bearing (4 things.) 3 - Upper thrust washer (2 pcs.) 4 - No. 1 Main Bearing Cap Locating Pin (2 pcs.) 5 - Main bearing cap bolts (10 pieces.) 6 -...
Crankshaft seals
Pos. spare part no Name 1 - Front crankshaft seal adapter 2 - Front crankshaft oil seal 3 - Rear crankshaft oil seal The crankshaft is sealed against the cylinder block front and rear with lip-type...
Pos. spare part no Name 1 - Front crankshaft seal adapter 2 - Front crankshaft oil seal 3 - Rear crankshaft oil seal The crankshaft is sealed against the cylinder block front and rear with lip-type...
Connecting rods and pistons
Pos. spare part no Name 1 - Top compression ring 2 - Lower compression ring 3 - Oil scraper ring 4 - piston pin 5 - Piston pin circlip (2 pcs.) 6 - Piston with connecting rod 7 - The bottom head of...
Pos. spare part no Name 1 - Top compression ring 2 - Lower compression ring 3 - Oil scraper ring 4 - piston pin 5 - Piston pin circlip (2 pcs.) 6 - Piston with connecting rod 7 - The bottom head of...
Oil sump housing and oil separator
Pos. spare part no Name 1 - Oil filler tube 2 - Oil separator 3 - Oil temperature sensor 4 - Oil separator return line 5 - Oil housing bolts (20 pcs.) 6 - Oil sump housing 7 - oil dipstick The...
Pos. spare part no Name 1 - Oil filler tube 2 - Oil separator 3 - Oil temperature sensor 4 - Oil separator return line 5 - Oil housing bolts (20 pcs.) 6 - Oil sump housing 7 - oil dipstick The...
Oil temperature sensor
Pos. spare part no Name 1 - Oil temperature sensor The oil temperature sensor is located on the rear left side of the oil sump housing. The sensor housing is screwed into the oil sump housing, its...
Pos. spare part no Name 1 - Oil temperature sensor The oil temperature sensor is located on the rear left side of the oil sump housing. The sensor housing is screwed into the oil sump housing, its...
Oil sump
Pos. spare part no Name 1 - oil sump 2 - Oil sump anchor bolt (21 pcs.) 3 - Oil drain plug The pressed steel oil sump is sealed with liquid sealant and secured with 21 captive bolts to the oil sump...
Pos. spare part no Name 1 - oil sump 2 - Oil sump anchor bolt (21 pcs.) 3 - Oil drain plug The pressed steel oil sump is sealed with liquid sealant and secured with 21 captive bolts to the oil sump...
Crankshaft pulley and vibration damper
Pos. spare part no Name 1 - Crankshaft pulley and vibration damper 2 - flat washer 3 - crankshaft pulley bolt The combined crankshaft pulley and vibration damper drive the auxiliaries from the engine...
Pos. spare part no Name 1 - Crankshaft pulley and vibration damper 2 - flat washer 3 - crankshaft pulley bolt The combined crankshaft pulley and vibration damper drive the auxiliaries from the engine...
Dual flywheel (with manual transmission)
Pos. spare part no Name 1 - Double flywheel 2 - Clutch plate surface 3 - Clutch cover dowel pin (3 pcs.) 4 - Installation location of the special tool for adjusting the ignition timing 5 - Bolt (8...
Pos. spare part no Name 1 - Double flywheel 2 - Clutch plate surface 3 - Clutch cover dowel pin (3 pcs.) 4 - Installation location of the special tool for adjusting the ignition timing 5 - Bolt (8...
Elements of the mechanism for adjusting the valve timing
Pos. spare part no Name 1 - Camshaft Pulley 2 - Timing chain 3 - Exhaust camshaft sprocket 4 - exhaust camshaft 5 - intake camshaft 6 - Intake camshaft sprocket 7 - Hydraulic Timing Chain Tensioner 8...
Pos. spare part no Name 1 - Camshaft Pulley 2 - Timing chain 3 - Exhaust camshaft sprocket 4 - exhaust camshaft 5 - intake camshaft 6 - Intake camshaft sprocket 7 - Hydraulic Timing Chain Tensioner 8...
Camshaft drive
The crankshaft sprocket drives the exhaust camshaft through the timing belt, which is worn on the coolant pump, auto-tensioner and idler pulleys. The crankshaft and timing elements rotate clockwise...
The crankshaft sprocket drives the exhaust camshaft through the timing belt, which is worn on the coolant pump, auto-tensioner and idler pulleys. The crankshaft and timing elements rotate clockwise...
Covers of elements of a drive of camshafts
Pos. spare part no Name 1 - Rear Timing Belt Cover 2 - Upper Timing Belt Cover 3 - Timing belt lower cover 4 - Screw (9 pcs.) The 1-section rear and 2-section front timing belt covers cover the...
Pos. spare part no Name 1 - Rear Timing Belt Cover 2 - Upper Timing Belt Cover 3 - Timing belt lower cover 4 - Screw (9 pcs.) The 1-section rear and 2-section front timing belt covers cover the...
Elements of the cylinder head
Pos. spare part no Name 1 - High pressure fuel injector (HP) (4 things.) 2 - Camshaft cover 3 - exhaust camshaft 4 - Hydraulic lash adjusters and roller valve levers (16 pcs.) 5 - conical crackers...
Pos. spare part no Name 1 - High pressure fuel injector (HP) (4 things.) 2 - Camshaft cover 3 - exhaust camshaft 4 - Hydraulic lash adjusters and roller valve levers (16 pcs.) 5 - conical crackers...
Cylinder head and camshaft cover
Pos. spare part no Name A - Camshaft cover B - cylinder head 1 - Injector support clamp bolt (4 things.) 2 - Injector support clamp (4 things.) 3 - Pin (4 things.) 4 - Pad 5 - exhaust camshaft 6 -...
Pos. spare part no Name A - Camshaft cover B - cylinder head 1 - Injector support clamp bolt (4 things.) 2 - Injector support clamp (4 things.) 3 - Pin (4 things.) 4 - Pad 5 - exhaust camshaft 6 -...
Cylinder head gasket
Pos. spare part no Name 1 - Engine type designation 2 - Gasket thickness designation 3 - Gasket thickness designation The cylinder head gasket is made of laminated metal in four different...
Pos. spare part no Name 1 - Engine type designation 2 - Gasket thickness designation 3 - Gasket thickness designation The cylinder head gasket is made of laminated metal in four different...
Camshafts
Pos. spare part no Name 1 - exhaust camshaft 2 - intake camshaft 3 - Bearing #3 (axial clearance control) 4 - Single row timing chain 5 - Camshaft Pulley The intake and exhaust camshafts are made of...
Pos. spare part no Name 1 - exhaust camshaft 2 - intake camshaft 3 - Bearing #3 (axial clearance control) 4 - Single row timing chain 5 - Camshaft Pulley The intake and exhaust camshafts are made of...
Camshaft Position Sensor (CMP)
Pos. spare part no Name A - Exhaust camshaft pulley - rear view 1 - CMP sensor 2 - Pulse zone of the CMP sensor 3 - Camshaft pulley keyway 4 - Location of the pin for adjusting the ignition timing...
Pos. spare part no Name A - Exhaust camshaft pulley - rear view 1 - CMP sensor 2 - Pulse zone of the CMP sensor 3 - Camshaft pulley keyway 4 - Location of the pin for adjusting the ignition timing...
Inlet and outlet valves
Pos. spare part no Name 1 - Lower spring plate 2 - valve spring 3 - Upper spring plate 4 - conical crackers 5 - Inlet valve 6 - Exhaust valve The cylinder head has two overhead camshafts that actuate...
Pos. spare part no Name 1 - Lower spring plate 2 - valve spring 3 - Upper spring plate 4 - conical crackers 5 - Inlet valve 6 - Exhaust valve The cylinder head has two overhead camshafts that actuate...
Hydraulic lash adjusters and valve levers
Pos. spare part no Name 1 - Hydraulic gap compensator 2 - Roller valve lever The 16 valves are actuated by roller valve levers and hydraulic lash adjusters, which in turn are actuated by camshaft...
Pos. spare part no Name 1 - Hydraulic gap compensator 2 - Roller valve lever The 16 valves are actuated by roller valve levers and hydraulic lash adjusters, which in turn are actuated by camshaft...
Cylinder head cover
Pos. spare part no Name 1 - PCV valve 2 - Hose Port for Crankcase Ventilation System 3 - Engine cover mount 4 - CMP sensor location The 'L'-shaped cylinder head cover sits on top of the camshaft...
Pos. spare part no Name 1 - PCV valve 2 - Hose Port for Crankcase Ventilation System 3 - Engine cover mount 4 - CMP sensor location The 'L'-shaped cylinder head cover sits on top of the camshaft...
Temperature control module
Pos. spare part no Name 1 - Temperature control module 2 - Bolt (2 pcs.) 3 - Stud and nut (2 pcs.) The cooling system temperature control module is attached to the rear of the cylinder head with two...
Pos. spare part no Name 1 - Temperature control module 2 - Bolt (2 pcs.) 3 - Stud and nut (2 pcs.) The cooling system temperature control module is attached to the rear of the cylinder head with two...
Vacuum pump
Pos. spare part no Name 1 - Port for vacuum booster 2 - Vacuum pump 3 - Port for port shutoff valve The vacuum pump is attached with three bolts to the rear left side of the cylinder head. It is...
Pos. spare part no Name 1 - Port for vacuum booster 2 - Vacuum pump 3 - Port for port shutoff valve The vacuum pump is attached with three bolts to the rear left side of the cylinder head. It is...
High pressure fuel pump
NOTE: Impact resistant pump guard not shown. Pos. spare part no Name 1 - High pressure fuel pump 2 - Bolt (3 pcs.) The high pressure fuel pump is mounted with three bolts to the right rear of the...
NOTE: Impact resistant pump guard not shown. Pos. spare part no Name 1 - High pressure fuel pump 2 - Bolt (3 pcs.) The high pressure fuel pump is mounted with three bolts to the right rear of the...
Common rail high pressure fuel manifold
Pos. spare part no Name 1 - High pressure fuel manifold type «Common Rail» 2 - Bolt (2 pcs.) The fuel manifold is made from forged steel and is bolted to the cylinder head, from above along the...
Pos. spare part no Name 1 - High pressure fuel manifold type «Common Rail» 2 - Bolt (2 pcs.) The fuel manifold is made from forged steel and is bolted to the cylinder head, from above along the...
Fuel injectors
Pos. spare part no Name 1 - Injector support clamp bolt 2 - locating pin 3 - copper washer 4 - centering ring 5 - Nozzle 6 - Injector support clamp Four piezoelectrically actuated fuel injectors are...
Pos. spare part no Name 1 - Injector support clamp bolt 2 - locating pin 3 - copper washer 4 - centering ring 5 - Nozzle 6 - Injector support clamp Four piezoelectrically actuated fuel injectors are...
Glow plugs
Pos. spare part no Name 1 - glow plug 2 - Glow plug wiring Four glow plugs are mounted on the bottom right side of the cylinder head, next to each volute intake port. Each glow plug is located in a...
Pos. spare part no Name 1 - glow plug 2 - Glow plug wiring Four glow plugs are mounted on the bottom right side of the cylinder head, next to each volute intake port. Each glow plug is located in a...
EGR valve with heat exchanger
Pos. spare part no Name 1 - Attachment to the camshaft cover 2 - EGR heat exchanger 3 - Bolt (3 pcs.) 4 - EGR valve The valve assembly with the EGR heat exchanger is located on the right side of the...
There is 2 commentary
Pos. spare part no Name 1 - Attachment to the camshaft cover 2 - EGR heat exchanger 3 - Bolt (3 pcs.) 4 - EGR valve The valve assembly with the EGR heat exchanger is located on the right side of the...
There is 2 commentary
Intake manifold
Pos. spare part no Name 1 - Intake manifold 2 - Bolt (7 pcs.) The intake manifold is located on the left side of the engine and is attached to the cylinder head with seven bolts. The four lower...
Pos. spare part no Name 1 - Intake manifold 2 - Bolt (7 pcs.) The intake manifold is located on the left side of the engine and is attached to the cylinder head with seven bolts. The four lower...
An exhaust manifold
Pos. spare part no Name 1 - An exhaust manifold 2 - Stud and nut (9 pcs.) 3 - Turbocharger support flange 4 - remote element (9 pcs.) 5 - Exhaust heat shield 6 - Exhaust heat shield mounting (4...
Pos. spare part no Name 1 - An exhaust manifold 2 - Stud and nut (9 pcs.) 3 - Turbocharger support flange 4 - remote element (9 pcs.) 5 - Exhaust heat shield 6 - Exhaust heat shield mounting (4...
Lubrication system
The lubrication system receives oil from the oil sump, oil is supplied under pressure. Oil lubricates the surfaces of moving engine parts, dissipates heat, absorbs fuel combustion products and seals...
The lubrication system receives oil from the oil sump, oil is supplied under pressure. Oil lubricates the surfaces of moving engine parts, dissipates heat, absorbs fuel combustion products and seals...
Oil pump
Pos. spare part no Name 1 - Cylinder block 2 - Oil pump 3 - bolts (4 things.) 4 - Safety valve body 5 - Oil pickup pipe and strainer 6 - Bolt (1 PC.) 7 - Oil pump outlet port 8 - Oil supply from the...
Pos. spare part no Name 1 - Cylinder block 2 - Oil pump 3 - bolts (4 things.) 4 - Safety valve body 5 - Oil pickup pipe and strainer 6 - Bolt (1 PC.) 7 - Oil pump outlet port 8 - Oil supply from the...
Oil filter assembly with oil cooler
Pos. spare part no Name 1 - Coolant return hose from oil cooler 2 - Coolant supply hose from cylinder block 3 - Oil filter housing 4 - Oil pressure sensor 5 - Oil radiator The combined engine oil...
Pos. spare part no Name 1 - Coolant return hose from oil cooler 2 - Coolant supply hose from cylinder block 3 - Oil filter housing 4 - Oil pressure sensor 5 - Oil radiator The combined engine oil...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections from Land Rover repair manuals:
• Power unit: Diesel engine 2.7L Land Rover Discovery 3 (2004-2009)
• Power unit: Diesel engine TD6 Land Rover Range Rover 3 (2001-2012)
• Power unit: Diesel engine ID4 2.4L Land Rover Defender 2007+ (2007-2016)
• Power unit: Diesel engine 2.7L Land Rover Discovery 3 (2004-2009)
• Power unit: Diesel engine TD6 Land Rover Range Rover 3 (2001-2012)
• Power unit: Diesel engine ID4 2.4L Land Rover Defender 2007+ (2007-2016)