WARNING: When raising the front of the vehicle, always place wheel chocks under the rear wheels of the vehicle.
Apply the parking brake. Move the automatic transmission selector to the 'P' - Park position. Move the manual transmission lever to the 'N' - Neutral position (neutral gear).
Position the lifting pad of the jack under the jacking point at the rear of the front subframe, pos. 3.
Once the vehicle has been raised to the desired height, carefully lower the jack until the vehicle rests on the stand (supports), pos. 1 or 2.
WARNING: Do not start work from below a jacked up vehicle unless axle stands have been installed in the places provided.
CAUTION: Place a suitable block under the threshold to prevent damage.
To remove the vehicle from the stands, follow these steps in reverse order.
Comments on this article