| Pos. | spare part no | Name |
| 1 | - | Parking Assist Module |
| 2 | - | Front and rear speaker |
| 3 | - | Front Parking Assist Sensor (4 things.) |
| 4 | - | Parking Assist Switch |
| 5 | - | Integrated control module (ICM) |
| 6 | - | Amplifier |
| 7 | - | Rear Parking Assist Sensor (4 things.) |
The car can be equipped with one of two levels of parking assistance: rear only or front and rear.
The parking assistance system provides the driver with audible warnings of any obstacles in the vehicle's forward path (if front sensors are installed) or reverse when parking. The system consists of four ultrasonic sensors located in each bumper, a parking aid module and a corresponding switch.
At low speeds, the parking assist module uses ultrasonic sensors to monitor the area around the front and rear bumpers. If any object is detected in the monitored area, the module issues a warning through the audio system speakers. The sensors are capable of detecting solid objects such as poles, walls and other vehicles, as well as semi-solid objects such as wire mesh fences. It is possible that objects that are very close to the ground will not be detected, because due to their low height they cannot cause damage to the vehicle.
The parking assistance system consists of the following elements:
- Parking Assist Module
- Parking Assist Switch
- 8 parking assist sensors
The parking assistance module communicates via the medium speed CAN bus with the audio system via the integrated control module (ICM). If a dangerous object is detected, the audio system emits warning sounds through the front or rear speakers. The medium speed CAN bus is also used to collect information from other vehicle systems.
Comments on this article