Rear drive axle of the car Land Rover Freelander 2

Rear axle specifications
Lubrication system Description Lubricant Volume (liters / pints / US quarts) Haldex controlled clutch Statoil SL01-301. Part No. Land Rover LR003136 0,65/1,1/0,69 Rear Drive Axle/Differential Castrol...

Description and principle of operation
Element Location Pos. spare part no Name 1 - Active clutch 2 - Differential 3 - Active clutch module Review The differential works in conjunction with the active clutch, transferring force to the...

Active clutch
NOTE: 3rd generation variant shown. Pos. spare part no Name 1 - Control valves - exhaust side 2 - Active clutch module 3 - Control valve / axial solenoid valve 4 - Oil pressure and temperature sensor...

How the Active Clutch Works
3rd generation couplings An internal electronically controlled pump provides hydraulic pre-pressure to the clutch. The preload pressure ensures that the required working pressure is applied to the...

Draining gear oil from differential
1. Raise and support the vehicle. WARNING: Place secure stands under the vehicle. WARNING: Park the vehicle on level ground. 2. The working fluid from the rear differential is not completely drained....

Activated friction clutch filler
NOTE: When installing a new active coupling, fill it with 650 ml of working fluid. During maintenance, it is not possible to completely drain the working fluid from the active coupling. The following...

Automatic clutch
Removing 1. Raise the car on a lift. WARNING: Place secure stands under the vehicle. 2. Remove the exhaust system. Refer to Procedure: Exhaust System (309-00B Exhaust system - 2.2L Duratorq - Td4,...

Active clutch control unit
NOTE: When installing a new active clutch module, a new sensor and throttle valve must also be installed. Removing 1. Raise the car on a lift. WARNING: Place secure stands under the vehicle. 2....

Fluid pump for active clutch
Removing 1. Raise the car on a lift. WARNING: Place secure stands under the vehicle. 2. Remove the pinion flange. Refer to procedure: Pinion protrusion (205-02 Rear drive axle / differential, Removal...

Sealing of the drive gear of the coupling
Special tool 100-012 Slide Hammer 205-862-1 Installer, Active On-demand Pinion Seal 308-529 Remover, Seals Removing 1. Raise the car on a lift. WARNING: Place secure stands under the vehicle. 2....

Differential box
NOTE: The description of the removal procedure in this manual may include installation steps. Removing 1. Raise and support the vehicle WARNING: Place secure stands under the vehicle. 2. Remove the...
There is 2 commentary

Differential support cushion
Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the exhaust system. Refer to Procedure: Exhaust System (309-00A Exhaust system - 3.2L NA - I6, Removal and...

Front differential bushing
Special tool 205-860-01 Remover, Differential Bushing 205-860-02 Remover, Differential Bushing 205-860-03 Installer, Differential Bushing 205-860-04 Installer, Differential Bushing 205-860-09...

Rear differential bushing
Special tool 205-860-09 Installer, Differential Bushing 205-861-01 Remover, Differential Bushing 205-861-02 Remover/Installer, Differential Bushing 205-861-03 Installer, Differential Bushing...

Pinion protrusion
Special tool 205-053 Retainer, Drive Flange Removing 1. Raise and support the vehicle WARNING: Place secure stands under the vehicle. 2. Remove the exhaust system. Refer to Procedure: Exhaust System...

Front pinion bearing
Removing 1. Raise and lower the vehicle on jack stands. 2. Drain the transmission fluid. Refer to the procedure: Draining the gear oil from the differential and filling the differential with gear oil...
There is 5 comments

Drive gear seal
Special tool 100-012 Slide Hammer 205-865 Installer, Differential Pinion Seal 303-538 Remover/Installer, Crankshaft Oil Seal 308-615 Remover, Seals Removing 1. Raise and support the vehicle. WARNING:...

Rear axle seal
Special tool 205-863 Installer, Halfshaft Seal Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the wheel. Refer to procedure: Wheel and tire (204-04 Wheels...