Vehicle parking brake Land Rover Freelander 2

Parking brake specification
General specification Detail Specifications Manufacturer TRW Parameter Drum in the center of the brake disc Operating principle Cable system with manual activation. Parking brake drum inner diameter...

Description of the parking brake
Location of elements Pos. spare part no Name 1 - parking brake extension 2 - Brake Shoe Clip (2 pcs.) 3 - Parking brake cable sheath bushing 4 - Upper (secondary) brake shoe 5 - Brake Shoe Mounting...
There is 4 commentary

How the parking brake works
When the parking brake lever is activated, the toothed sector turns and pulls the threaded rod and cable equalizer. The equalizer pulls the two parking brake cables and activates the two extensions...

Parking brake diagnostics and checks
Inspection and verification 1. Visually inspect for obvious signs of damage and system integrity. Mechanical factors Electrical Factors Parking brake lever Cable and cable sheath Equalizer Parking...

Parking brake pinpoint tests
Pinpoint Test A: Parking brake does not engage A1: Check rear parking brake cable for misadjustment Perform the parking brake cable adjustment procedure. For more information, refer to: Parking Brake...

Parking brake cable adjustment
1. Tighten the parking brake lever, tightening one ratchet position at a time, and count the number of clicks required to reliably apply the brakes. The brakes should be firmly applied at the 3 to 9...

Running-in parking brake pads
NOTE: This procedure must be performed if new parking brake pads, new rear brake discs have been installed, or if the vehicle has been driven through deep mud (not in water) over 80 km. 1. Perform...

Parking brake control
Removing 1. Remove the floor console. Refer to Procedure: Floor Console (501-12 Instrument panel and console, Removal and installation). 2. Tightening torque: 25 Nm Installation 1. When installing,...

Parking brake indicator switch
Removing 1. Remove the floor console. Refer to procedure: Floor Console (501-12, Removal and installation). 2. Release the parking brake. 3. Remove the parking brake switch. Installation 1. Replace...

Front parking brake cable
Removing NOTE: The front parking brake cable is part of the parking brake lever. 1. Remove the parking brake lever. Refer to Procedure: Parking Brake Control (206-05, Removal and installation)....

Parking brake release drive
Removing 1. Remove the luggage compartment. 2. Turn out an adjusting nut and disconnect a forward cable of a parking brake. 3. Release the rear parking brake cables and remove the compensator. 4....

Parking brake pads
NOTE: If the parking brake pads or brake discs have been removed to gain access to other components, DO NOT PERFORM the break-in procedure. Removing 1. Raise and support the vehicle. WARNING: Do not...