Headlight washer pump (Freelander 2)

Removing

1. Raise and support the vehicle.

WARNING: It is forbidden to carry out work on a vehicle standing on only one jack. Always place secure supports under the vehicle.

2. Remove the right mudguard. Refer to Procedure: Fender Mudguard (501-02 Front body panels, Removal and installation).

3. Drain the fluid from the washer reservoir.

4. Disconnect the headlight washer pump.

NOTE: Do not proceed with further dismantling if the element is removed only for access.

Installation

1. When installing, follow the removal procedure in reverse order.