Car windscreen wipers and washers Land Rover Freelander 2

Specification of windshield wipers and washers
Refueling volumes Position Filling volume, liter / pint / US gallon Windshield washer reservoir : with headlight washer 5,8/10,2/6,1 Without headlight washer 3,1/5,5/3,3 General specification...

Description and principle of operation
Pos. spare part no Name 1 - Windshield wiper arm assembly motor 2 - Automatic temperature control module (ATC) 3 - Rain sensor (in the presence of) 4 - Rear wiper motor 5 - Auxiliary electrical box...

Electric motor of windshield wipers
Pos. spare part no Name 1 - electric motor 2 - electrical connector The windshield wiper motor drives a gear through a worm gear connected to the motor output shaft. The gear has a central hub that...

Lever mechanism of windshield wipers
Pos. spare part no Name 1 - Right crank 2 - Right tie rod 3 - Windshield wiper motor 4 - Left (LH) tie rod 5 - Left pivot 6 - Left crank 7 - Main pipe 8 - Right swivel The wiper linkage includes a...

Rain sensor
The rain sensor is located behind the body of the interior rear-view mirror and is installed in a bracket glued to the inner surface of the windshield. The rain sensor consists of several emitting...

Rear window cleaner electric motor
Pos. spare part no Name 1 - electric motor 2 - Shaft 3 - electrical connector The single speed rear window wiper motor is mounted on the inside of the liftgate and secured with 3 bolts. The bushings...

Control Chart
NOTE: A = rigid connection; N = medium speed CAN bus; O = LIN bus Pos. spare part no Name 1 - Battery 2 - Rain sensor 3 - Right multifunction steering column switch. 4 - ATC module 5 - Dashboard 6 -...

Work principles
The wiper and washer system can operate in different modes when the vehicle is in power mode 4 to 8. Requests from the right multifunction steering column switch are transmitted via the LIN bus to...

Inspection and verification
CAUTION: Diagnosis by substituting a component from another vehicle is NOT allowed. Substitution of control modules does not guarantee confirmation of the fault and, in addition, may cause additional...

DTC Fault Code Index
NOTE: If a control module or component is suspected and the vehicle continues to be covered by the manufacturer's warranty, refer to the warranty manual before installing a new module/component...

Windshield wiper motor
NOTE: The description of the removal procedure in this manual may include installation steps. Removing 1. Remove the mixing chamber panel. Refer to Procedure: Mixing Chamber (412-01 Climate control,...

Rear window cleaner electric motor
NOTE: The description of the removal procedure may contain a description of the installation steps. Removing 1. Remove the rear wiper arm. 2. Remove the tailgate trim panel. Refer to Procedure:...

Rain intensity sensor
Removing 1. Remove a rear-view mirror of salon. Refer to Procedure: Interior Rear View Mirror (501-09 Rear-view mirrors, Removal and installation). 2. Installation 1. When installing, follow the...

Headlight washer nozzle
Removing 1. Raise and support the vehicle. WARNING: Do not work on or under a vehicle supported only by a jack. Be sure to install reliable supports under the car. 2. Remove the front wheels complete...

Wiper lever
Removing 1. NOTE: Do not proceed with disassembly if the element is being removed only to gain access. Installation 1. Tightening torque: 25 Nm

Windshield washer pump
Removing 1. Raise and support the vehicle. WARNING: It is forbidden to carry out work on a vehicle standing on only one jack. Always place secure supports under the vehicle. 2. Remove the right...

Windshield washer reservoir
NOTE: The description of the removal procedure in this manual may include installation steps. Removing 1. Raise and support the vehicle. WARNING: It is forbidden to carry out work on a vehicle...

Headlight washer pump
Removing 1. Raise and support the vehicle. WARNING: It is forbidden to carry out work on a vehicle standing on only one jack. Always place secure supports under the vehicle. 2. Remove the right...

Rear Window cleaner rotary lever
Special tool 303-D121 Puller, General Purpose NOTE: The description of the removal procedure may contain a description of the installation steps. Removing 1. Release the cover. Loosen but do not...