Special tool
 204-598 Hydraulic Cylinder 10t |  204-598-01 Remover/Installer, Subframe Bushing Gu |
Removing
1. Remove the cover and disconnect the ground wire from the battery. Refer to procedure: Specifications (414-00 Charging system - General information, Specifications).
2. Raise and support the vehicle.
WARNING: Place secure stands under the vehicle.
3. Remove the front subframe assembly. Refer to procedure: Front subframe (502-00 Uni-body, subframe and mounting system, Removal and installation).
4. Remove bushing. Special tool: 204-598, 204-598-01
Special tool 204-598-01/8 is used to start the bushing removal process and should be removed after the bushing is released as it does not go through the subframe bushing hole.
CAUTION: Mark the position of the elements to facilitate subsequent installation.
Installation
1. Install bushing. Special tool: 204-598, 204-598-01
2. Install the front subframe. Refer to procedure: Front subframe (502-00 Uni-body, subframe and mounting system, Removal and installation).
3. Connect the ground wire to the battery and install the cover. Refer to procedure: Specifications (414-00 Charging system - General information, Specifications).
Comments on this article