C-pillar trim panel (Freelander 2)

NOTE: The description of the removal procedure may contain a description of the installation steps.

Removing

1. Release the lower seat belt anchor. Tightening torque: 40 Nm

WARNING: Use a new bolt.

2. Release the rear door seal.



3. Release the panel of finishing of a back lateral part of a body.



4. Remove the pillar trim panel "WITH". Tightening torque: 3 Nm

WARNING: Use a new bolt.

5.

NOTE: Do not proceed with further disassembly if the element is removed only for access.

Installation

1. When installing, follow the removal procedure in reverse order.