Intake manifold gaskets, left side (Freelander 1)

Dismantling

1. Disconnect "negative" battery terminal.

2. Drain the engine coolant.

COOLING SYSTEM: MOD. K, KV6 engine, ADJUSTMENTS, Coolant drain, system flush and fill.

3. Remove the fuel rail.

PETROL FUEL SUPPLY, ADJUSTMENTS, Fuel rail, KV6 engine: Except North American market.

PETROL ENGINE FUEL SUPPLY, ADJUSTMENTS, Fuel rail, KV6 engine: North American market countries.

4. Wring out shoulders and take out a ventilation hose from the left inlet collector.

5. Loosen the clamp and disconnect the coolant hose from the intake manifold.

6. Consistently loosen and turn away 7 bolts of fastening of the left inlet manifold to a head of cylinders.

7. Remove the intake manifold and discard its gaskets.

Installation

1. Clean intake manifold and mating surfaces on cylinder head.

2. Install a new gasket on the cylinder head, install the intake manifold, screw in the bolts and tighten them to 25 Nm.

3. Attach a ventilation hose to the left intake manifold.

4. Attach a hose of system of cooling to a collector and fix it with a collar.

5. Install the fuel rail.

PETROL FUEL SUPPLY, ADJUSTMENTS, Fuel rail, KV6 engine: Except North American market.

PETROL ENGINE FUEL SUPPLY, ADJUSTMENTS, Fuel rail, KV6 engine: North American market countries.

6. Fill the cooling system with coolant.

COOLING SYSTEM: MOD. K, KV6 engine, ADJUSTMENTS, Coolant drain, system flush and fill.

7. Attach "negative" battery terminal.