Sensors: Coolant Temperature Sensor (ECT) (Freelander 1)

Dismantling

1. Disconnect "negative" battery terminal.

2. Drain the engine coolant.

COOLING SYSTEM: Td4 engine, ADJUSTMENTS, Coolant drain, system flush and fill.

3. Remove the intake manifold gaskets.

MANIFOLDS AND EXHAUST SYSTEM - Td4, REPAIRS, Intake manifold gaskets.

4. Disconnect the block from the coolant temperature sensor.

5. Using a tall socket, carefully unscrew the coolant temperature sensor (ECT) and discard the gasket.

Installation

1. Wipe the mating surfaces of the sensor (ECT) and cylinder heads.

2. Put on the coolant temperature sensor (ECT) new sealing washer, screw it in and tighten to 15 Nm.

3. Connect the connector to the coolant temperature sensor (ECT).

4. Install the intake manifold gaskets.

MANIFOLDS AND EXHAUST SYSTEM - Td4, REPAIRS Intake manifold gaskets.

5. Attach "negative" battery terminal.

6. Fill the cooling system with coolant.

COOLING SYSTEM: Td4 engine, ADJUSTMENTS, Coolant drain, system flush and fill.