High pressure tube (Freelander 1)

Dismantling

1. Disconnect "negative" battery terminal.

WARNING: Fuel vapors are highly flammable and in an enclosed area are also toxic and explosive. When working with fuel, it is necessary to have a foam type, carbon dioxide fire extinguisher at hand (CO₂), gas or powder.

2. Remove the intake manifold gaskets.

MANIFOLDS AND EXHAUST SYSTEM - Td4, REPAIRS, Intake manifold gaskets.

3. Lay out a rag to collect escaping fuel.

CAUTION: Before disconnecting or removing system components, make sure that the surfaces adjacent to the connection points are free of dirt. Install plugs in fittings and piping to keep dirt out of the system.

4. Remove the vibration absorbers from the tubes.

5. Turn away nuts of unions and remove pipes of a high pressure.

CAUTION: To avoid damaging the components, loosen and tighten the nuts while holding the fitting with a second wrench.

Installation

1. Clean the high pressure pipe connections.

2. Install the high pressure pipes and tighten the nuts. Tightening torque 20 Nm.

3. Install vibration dampers on the tubes.

4. Install the intake manifold gaskets.

MANIFOLDS AND EXHAUST SYSTEM - Td4, REPAIRS, Intake manifold gaskets.

5. Attach "negative" battery terminal.