Dismantling
1. Disconnect "negative" battery terminal.
2. Remove the battery pad.
SYSTEM OF STARTING THE ENGINE AND CHARGING THE BATTERY, REPAIR WORKS, Support tray - storage battery.
3. Drain the engine coolant.
COOLING SYSTEM: MODIFICATION K, volume 1.8, ADJUSTMENTS, Coolant drain, system flushing and filling.
4. Loosen the clamp and disconnect the top hose from the radiator.
5. Disconnect the electrical connectors from the relay housing and from the fan motors.
6. Pull the wire harness away from the fan shroud.
7. Turn away 4 bolts of fastening of a casing of the fan to a radiator.
8. Turn away two self-tapping screws of fastening of a radiator to a cross-beam of a frame of a radiator.
9. With the help of a partner, carefully remove the fan shroud with motor.
10. Turn away 6 bolts of fastening of electric motors of fans to a casing and remove electric motors.
Installation
1. Install the motors on the casing, screw in the bolts and tighten them to a torque of 5 Nm.
2. Install the fan assembly with the electric motor on the radiator, screw in the screws and tighten them with a torque of 5 Nm.
3. Screw in the screws.
4. Connect the connectors.
5. Attach the relay and wiring harness to the fan shroud.
6. Connect the top hose to the radiator and secure with a clamp.
7. Attach the lower hose to the radiator and secure it with a clamp.
8. Fill the engine with coolant.
COOLING SYSTEM: MODIFICATION K, volume 1.8, ADJUSTMENTS, Coolant drain, system flushing and filling.
9. Install the battery tray.
SYSTEM OF ENGINE START AND CHARGING OF AKB, REPAIR WORKS Support tray - rechargeable battery.
10. Attach "negative" battery terminal.
Comments on this article