K1.8 engine cooling system Land Rover Freelander 1

Draining the coolant, flushing the system and filling
Operating procedure 1. Inspect the engine and cooling system components for leaks. 2. Check the hoses for cracks, deformation and reliability of the connecting parts. 3. Remove the lower engine...

Filling the cooling system
Filling 1. Prepare coolant of the required concentration. FILLING CAPACITIES, LIQUIDS AND OILS, Lubrication system. 2. Set the interior heating control to the maximum heat position. 3. Remove the...

Expansion tank — removal and installation
Dismantling 1. Install a container to collect the escaping coolant. 2. Turn away a collar and disconnect a hose of a broad tank from a distributive pipe of system of cooling. 3. Unscrew the clamp and...

Fan and cooling fan motor: without air conditioning
Dismantling 1. Disconnect "negative" battery terminal. 2. Disconnect the electrical connectors from the relay housing and from the fan motors. 3. Pull the wire harness away from the fan shroud. 4....

Fan and cooling fan motor: with air conditioning
Dismantling 1. Disconnect "negative" battery terminal. 2. Remove the battery pad. SYSTEM OF STARTING THE ENGINE AND CHARGING THE BATTERY, REPAIR WORKS, Support tray - storage battery. 3. Drain the...

Cooling fan controller
Dismantling 1. Disconnect "negative" battery terminal. 2. Disconnect the connector from the fan controller. 3. Remove the cover from the cooling fan controller. 4. Turn away a bolt of fastening of...

Radiator assembly — removal and installation
Dismantling 1. Disconnect "negative" battery terminal. 2. Remove the front bumper assembly. EXTERIOR PARTS, REPAIR WORKS, Front bumper assembly - for vehicles up to 2004 model year. 3. Remove the...

Thermostat — removal and installation
Dismantling 1. Disconnect "negative" battery terminal. 2. Drain the engine coolant. COOLING SYSTEM: MODIFICATION K, volume 1.8, ADJUSTMENTS, Coolant drain, system flushing and filling. 3. Loosen the...
There is 2 commentary