| Threaded connection | In the SI system | In Pound Feet |
| drain plug | 35 N.m | 26 lb-ft |
| Heat Shield Mounting Screws to Exhaust Bracket | 45 N.m | 33 lb-ft |
| Screws for fastening the heat-reflecting shield of the exhaust system to the intermediate reduction gear (Td4 engine) | 30 N.m | 22 lb-ft |
| Nut of fastening of the heat-reflecting shield of the exhaust system to the intermediate reduction gear (K1.8 and KV6 engines) | 45 N.m | 33 lb-ft |
| Filler / control plug | 35 N.m | 26 lb-ft |
| Screws of fastening of an intermediate reduction gear to a transmission | 90 N.m | 66 lb-ft |
| Intermediate reduction cover screws + | 30 N.m | 22 lb-ft |
| Screw of fastening of an arm of an intermediate reduction gear to the block of cylinders (K1.8 engine) | 48 N.m | 35 lb-ft |
| Screw of fastening of an arm of an intermediate reduction gear to the block of cylinders (K1.8 engine) | 48 N.m | 35 lb-ft |
| Screws for fastening the bracket to the intermediate reduction gear (Td4 engine) | ||
| - M8 | 30 N.m | 22 lb-ft |
| - M10 | 50 N.m | 37 lb-ft |
| Screws for fastening the bracket to the intermediate reduction gear (K1.8 and KV6 engines) | 50 N.m | 37 lb-ft |
| Screws of fastening of an arm of the intermediate reduction gear to the pallet (K1.8 and KV6 engines) | 88 N.m | 65 lb-ft |
| Screws securing the intermediate reduction gear bracket to the lower fixed engine mount | 100 N.m | 74 lb-ft |
| Manifold Heat Shield to Idle Downshift Bracket (K1.8 and KV6 engines) | 9 N.m | 6.5 lb-ft |
| Header Heat Shield to Idle Downshift Bracket (K1.8 and KV6 engines) | 25 N.m | 18 lb-ft |
| Nut of fastening of a heat-reflecting shield of a collector to a case of transfer (KV6 engine) | 45 N.m | 33 lb-ft |
| Screws for securing the exhaust manifold heat shield to the intermediate reduction gear (Td4 engine) | 30 N.m | 22 lb-ft |
| Breather tube bracket screw | 9 N.m | 7 lb-ft |
| Nuts for fastening the silent block to the transmission housing (K1.8 engine) | 25 N.m | 18 lb-ft |
| Shank nut | 150 N.m | 111 lb-ft |
| Pinion housing nuts | 25 N.m | 18 lb-ft |
| Bolts of fastening of the cardan shaft to the flange of the intermediate downshift | 40 N.m | 30 lb-ft |
+ Apply sealant, part no. STC 4600 to the threads.
Comments on this article