| Threaded connection | In the SI system | In Pound Feet |
| Rear final drive shank nut | ||
| - Initial tightening | 190 N.m | 140 lb-ft |
| - Maximum value | 373 N.m | 275 lb-ft |
| Screws of fastening of a back cover to a case of the main transfer + | 25 N.m | 18 lb-ft |
| Screws of forward fastening of a case of the main transfer | 65 N.m | 48 lb-ft |
| Bolt of fastening of a forward support of the main transfer to a subframe | 120 N.m | 89 lb-ft |
| Screws of back fastening of a case of the main transfer | 65 N.m | 48 lb-ft |
| Oil filler plug of the crankcase of the main gear | 27 N.m | 20 lb-ft |
| Nut and bolt for fastening the longitudinal rod to the wheel bearing assembly | 120 N.m | 89 lb-ft |
+ Apply sealant, part no. STC 50552 to the threads.
Comments on this article