| Threaded connection | In the SI system | In Pound Feet |
| Screw of fastening of the sensor of position of a camshaft (SMR) | 8 Nm | 6 lb-ft |
| Screw of fastening of the sensor of position of a cranked shaft | 8 Nm | 6 lb-ft |
| Nut of a clamp of the thermostatic case of electronic blocks of management of the engine | 9 Nm | 7 lb-ft |
| Screw of fastening of the gauge of temperature of a cooling liquid (ECT) to crankcase + | 15 Nm | 11 lb-ft |
| Nuts of the switch of giving of fuel at engine braking | 2 Nm | 1.5 lb-ft |
| Torx screws securing the idle air control valve to the manifold | 1.5 Nm | 1.1 lb-ft |
| Heat shield and ignition coil fixing screws | 10 Nm | 7.5 lb ft |
| Ignition coil mounting screws | 8 Nm | 6 lb-ft |
| Spark plugs in the block head | 27 Nm | 20 lb-ft |
| Torx screws holding the throttle body to the intake manifold chamber (KV6 engine) | 7 Nm | 5 lb-ft |
| Torx screws attaching throttle actuator bracket to throttle body (only for vehicles with cruise control) | 9 Nm | 7 lb-ft |
| Torx screws securing the throttle position sensor to the housing | 1.5 Nm | 1.1 lb-ft |
+ Apply sealant, part no. STC 50552 to the threads.
Comments on this article