Threaded connection | In the SI system | In Pound Feet |
Screw of fastening of a highway of a cooling liquid to a head of the block | 20 N.m | 15 lb-ft |
Screw of fastening of a highway of system of cooling to a final collector | 20 N.m | 15 lb-ft |
Screw securing the water pipe to the thermostat housing | 8 N.m | 6 lb-ft |
Bolts of fastening of a cooler of system recirculation of the fulfilled gases (EGR) to block head and mounting lug | 25 N.m | 18 lb-ft |
EGR pipe retainer screw | 10 N.m | 7.5 lb-ft |
Screw of fastening of the pipeline EGR to a head of the block | 20 N.m | 15 lb-ft |
Torx screws attaching the EGR pipe to the manifold | 22 N.m | 16 lb-ft |
Nuts of fastening of a final collector to a head of the block | 24 N.m | 18 lb-ft |
Nuts of fastening of a pressure plate of a forward pipe | 50 N.m | 37 lb-ft |
Nuts of fastening of flanges of forward and intermediate pipes | 60 N.m | 44 lb-ft |
The screw of fastening of a fuel stage to a highway of system of cooling | 10 N.m | 7.5 lb-ft |
Screw securing the fuel rail to the bracket | 10 N.m | 7.5 lb-ft |
Allen screws securing heat shield to coolant line | 8 N.m | 6 lb-ft |
Intake manifold: | ||
- Bolts M6 | 10 N.m | 7.5 lb-ft |
- Bolts and nuts M7 | 15 N.m | 11 lb-ft |
Nuts of a flange of connection of an intermediate and back pipes | 60 N.m | 44 lb-ft |
Clamping nut rear pipe | 55 N.m | 41 lb-ft |
Turbocharger to exhaust manifold screws | 50 N.m | 37 lb-ft |
Screws of fastening of an output pipe of a turbocharger | ||
- 6 mm | 10 N.m | 7.5 lb-ft |
- 8 mm | 25 N.m | 18 lb-ft |
Td4 engine intake and exhaust manifolds (Freelander 1)
This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Previous articles
Drain plugs and wheels
Threaded connections for Td4 engine
Threaded connections for motor K1.8
Threaded connections for KV6 engine
Exhaust gas toxicity control
Diesel engine management system — EDC
Modular Engine Management System — MEMS
Engine management system — Siemens
Diesel engine fuel supply system
Gasoline engine power system
Engine cooling system
Threaded connections for Td4 engine
Threaded connections for motor K1.8
Threaded connections for KV6 engine
Exhaust gas toxicity control
Diesel engine management system — EDC
Modular Engine Management System — MEMS
Engine management system — Siemens
Diesel engine fuel supply system
Gasoline engine power system
Engine cooling system
Current article
Td4 engine intake and exhaust manifolds
Next articles
K1.8 engine intake and exhaust manifolds
KV6 engine intake and exhaust manifolds
Threaded clutch connections
Manual transmission PG1
Getrag manual transmission
Intermediate downshift
Jatco automatic transmission
Threaded connections of drive shafts
Rear axle and final drive
Threaded steering connections
Front suspension and subframe
Rear suspension and subframe
Threaded connections of the brake system
Airbag system
Threaded body connections
Threaded connections for heating and ventilation
Air conditioner screw connections
Windshield wiper and washers
Threaded connections of electrical equipment
KV6 engine intake and exhaust manifolds
Threaded clutch connections
Manual transmission PG1
Getrag manual transmission
Intermediate downshift
Jatco automatic transmission
Threaded connections of drive shafts
Rear axle and final drive
Threaded steering connections
Front suspension and subframe
Rear suspension and subframe
Threaded connections of the brake system
Airbag system
Threaded body connections
Threaded connections for heating and ventilation
Air conditioner screw connections
Windshield wiper and washers
Threaded connections of electrical equipment
Similar articles from Land Rover repair manuals:
• Starting the car engine Discovery 3 (2004-2009)
• Exhaust and intake manifolds and exhaust system Range Rover 3 (2001-2012)
• Engine compartment Defender 2007+ (2007-2016)
• Starting the car engine Discovery 3 (2004-2009)
• Exhaust and intake manifolds and exhaust system Range Rover 3 (2001-2012)
• Engine compartment Defender 2007+ (2007-2016)
No comments yet
Comments on this article