| Threaded connection | In the SI system | In Pound Feet |
| Soundproof engine cover | 8 Nm | 6 lb-ft |
| Allen Bolt for Attachment Belt Idler* | 24 Nm | 18 lb-ft |
| Attachment belt tensioner nut | 10 Nm | 7.5 lb-ft |
| Connecting rod cap screws: | ||
| - First take | 5 Nm | 3.5 lb-ft |
| - Second take | 25 Nm | 18 lb-ft |
| - Third take | +70° | +70° |
| Camshaft bearing caps** | 10 Nm | 7.5 lb-ft |
| Camshaft cover bolts** | 10 Nm | 7.5 lb-ft |
| Bolts of fastening of an asterisk of a camshaft | ||
| - First take | 20 Nm | 15 lb-ft |
| - Second take | +35° | +35° |
| Chain Lubrication Nozzle Bolt | 10 Nm | 7.5 lb-ft |
| Screws of fastening of a highway of system of cooling to a final collector | 20 Nm | 15 lb-ft |
| Screws of fastening of a highway of system of cooling to a final collector | 8 Nm | 6 lb-ft |
| crankshaft pulley | ||
| - First take | 100 Nm | 74 lb-ft |
| - Second take | +60 ° | +60 ° |
| - Third take | +60 ° | +60 ° |
| - Fourth move | +30 ° | +30 ° |
| Crankshaft rear seal housing: | ||
| - Bolts M6 | 10 Nm | 7.5 lb-ft |
| - Bolts M8 | 22 Nm | 16 lb-ft |
| Cylinder Block Reinforcement Plate | 22 Nm | 16 lb-ft |
| Block head bolts: (Techniques 1 to 5 apply to bolts 1-11. Reception 6 is only for bolt 12) | ||
| - 1 reception** | 80 Nm | 59 lb-ft |
| - Step 2 - Loosen all bolts** | -1/2 turn | -1/2 turn |
| - 3 doses** | 50 Nm | 37 lb-ft |
| - 4 receptions** | +90° | +90° |
| - 5 doses** | +90° | +90° |
| - 6 reception - tighten the 41 mm bolt, position 12 | 110 Nm | 81 lb-ft |
| Allen screws securing the cylinder head to the front cover | 15 Nm | 11 lb-ft |
| Screw of fastening of a tube of a control probe to the case of the oil filter | 10 Nm | 7.5 lb-ft |
| Screws of fastening of a leading disk to a cranked shaft | 115 Nm | 85 lb-ft |
| Bolts of fastening of a cooler of system recirculation of the fulfilled gases (EGR) to block head and mounting lug | 25 Nm | 18 lb-ft |
| Screw for fastening the air pipe to the air filter housing | 10 Nm | 7.5 lb-ft |
| Engine lifting eye screws | 20 Nm | 15 lb-ft |
| Bolts of fastening of a support of the engine to the engine | 100 Nm | 74 lb-ft |
| Nuts for fastening the engine mount to the support brackets | 85 Nm | 63 lb-ft |
| Engine lower fixed mount bolts | ||
| - M10 | 45 Nm | 33 lb-ft |
| - M12 | 50 Nm | 37 lb-ft |
| Engine fixed mount bolt | 100 Nm | 74 lb-ft |
| Nuts of fastening of a final collector to a head of the block | 24 Nm | 18 lb-ft |
| Screws of fastening of a flywheel to a cranked shaft | 115 N.m | 85 lb-ft |
| Screw of fastening of the fuel pipeline to the case of the oil filter | 10 N.m | 7.5 lb-ft |
| Nuts of unions of the fuel pipeline | 30 N.m | 22 lb-ft |
| Allen screw of fastening of the bottom directing chain of a drive of the fuel pump | 24 N.m | 18 lb-ft |
| Nut of fastening of an asterisk of the fuel pump | 65 N.m | 48 lb-ft |
| Allen screws fuel rail | 24 N.m | 18 lb-ft |
| Screws for fastening the fuel rail to the cooling system line | 10 N.m | 7.5 lb-ft |
| Screws for fastening the fuel rail to the brackets | 10 N.m | 7.5 lb-ft |
| glow plugs | 18 N.m | 13 lb-ft |
| Allen screws securing heat shield to coolant line | 8 N.m | 6 lb-ft |
| Screws of fastening of the union of a hose to a head of the block | 8 N.m | 6 lb-ft |
| Through screw securing the left engine mount to the gearbox bracket | 100 N.m | 74 lb-ft |
| Fastening the left engine mount to the car body. | 45 N.m | 33 lb-ft |
| Coolant Line Lower Support Screws | 15 N.m | 11 lb-ft |
| Main bearing cap screws | ||
| - 1st reception** | 20 N.m | 15 lb-ft |
| - 2nd appointment** | +70° | +70° |
| Screws for fastening the oil heat exchanger to the oil filter | 22 N.m | 16 lb-ft |
| Oil supply screws | 10 N.m | 7.5 lb-ft |
| Oil filter cover | 25 N.m | 18 lb-ft |
| Screws of fastening of the case of the oil filter | 25 N.m | 18 lb-ft |
| Screws for attaching the oil intake strainer to the oil pump | 10 N.m | 7.5 lb-ft |
| Oil pressure switch | 38 N.m | 28 lb-ft |
| Torx screw securing the oil pump drive gear to the oil pump shaft | 25 N.m | 18 lb-ft |
| Fastening of the oil pump to the block of cylinders | 25 N.m | 18 lb-ft |
| Screw of fastening of a clamp of the pipeline of the hydraulic booster of a steering to an engine mounting lug | 10 N.m | 7.5 lb-ft |
| Pallet** | ||
| - M6 screws | 10 N.m | 7.5 lb-ft |
| - M8 screws | 28 N.m | 21 lb-ft |
| Drain plug of the pallet of the engine | 28 N.m | 21 lb-ft |
| Pan flange screws | 10 N.m | 7.5 lb-ft |
| Guide chains of the gas distribution mechanism drive | 20 N.m | 15 lb-ft |
| Drive chain tensioner plug | 30 N.m | 22 lb-ft |
| Drive chain tensioner screw | 10 N.m | 7.5 lb-ft |
| Front cover fixing screws** | 15 N.m | 11 lb-ft |
| Turbocharger to exhaust manifold screws | 45 N.m | 33 lb-ft |
| Screws of fastening of an output pipe of a turbocharger | ||
| - 6 mm | 10 N.m | 7.5 lb-ft |
| - 8 mm | 25 N.m | 18 lb-ft |
| Vacuum pump mounting screws | 22 N.m | 16 lb-ft |
* Install a new screw.
** Tighten consistently.
Comments on this article