Engine cooling system Td4
| Threaded connection | In the SI system | In Pound Feet |
| Screws of fastening of the union of a hose of system of cooling to a head of the block | 8 N.m | 6 lb-ft |
| Screws for fastening the lower line of the cooling system to the pallet | 10 N.m | 7.5 lb-ft |
| Screw of fastening of a highway of a cooling liquid to a head of the block | 20 N.m | 15 lb-ft |
| Screw of fastening of a highway of system of cooling to a final collector | 20 N.m | 15 lb-ft |
| Screws of fastening of the pump of system of cooling to the block of cylinders | 10 N.m | 7.5 lb-ft |
| Screws for fastening the fan assembly with the electric motor to the fan casing | 5 N.m | 4 lb-ft |
| Fan shroud to radiator screws | 5 N.m | 4 lb-ft |
| Nuts of fastening of a cooler of fuel to a support | 10 N.m | 7.5 lb-ft |
| The screw of fastening of a fuel stage to a highway of system of cooling | 10 N.m | 7.5 lb-ft |
| Allen screws securing heat shield to coolant line | 8 N.m | 6 lb-ft |
| Screws of fastening of the case of the thermostat to the pump of system of cooling | 8 N.m | 6 lb-ft |
| Screw of fastening of a highway of system of cooling to the case of the thermostat | 8 N.m | 6 lb-ft |
Engine cooling system K1.8
| Threaded connection | In the SI system | In Pound Feet |
| Capacitor to radiator screws | 3 N.m | 2.2 lb-ft |
| Screw of fastening of the block of management of the fan of the cooling system | 5 N.m | 4 lb-ft |
| Attaching the fan shroud to the radiator | 5 N.m | 4 lb-ft |
| Screws for fastening the fan assembly with the electric motor to the fan casing | 5 N.m | 4 lb-ft |
KV6 engine cooling system
| Threaded connection | In the SI system | In Pound Feet |
| Screws of fastening of the pump of system of cooling to the block of cylinders * | 9 N.m | 6.5 lb-ft |
| Screws for fastening the fan assembly with the electric motor to the fan casing | 5 N.m | 3.7 lb-ft |
| Fan shroud to radiator screws | 5 N.m | 3.7 lb-ft |
| Drain plug of the cylinder block cooling jacket + | 20 N.m | 15 lb-ft |
| Screws for fastening the screen of injectors to the right fuel rail and intake manifold | 9 N.m | 6.5 lb-ft |
| Radiator shield screws | 5 N.m | 3.7 lb-ft |
| Screw of the thermostat flange and the elbow pipe of the cooling system line | 18 N.m | 13 lb-ft |
* Tighten consistently.
+ Apply sealant, part no. STC 50552 to the threads.
Comments on this article