Car Repair Techniques Land Rover Freelander 1

General recommendations when performing locksmith work
Precautions to prevent breakdowns To avoid damage to the vehicle when performing repairs, always observe the following points. Always cover fenders and seats with protective cloth before starting...

Ball and roller bearings
When removing and installing rolling bearings, follow the instructions listed below. This is a guarantee of reliable and durable operation. Wash the bearing thoroughly. All traces of grease must be...

Oil seals
Always change oil seals (cuffs) to new ones in case of dismantling the seal (when only the seal was dismantled and when the seal was dismantled as part of an assembly unit). NEVER install seals that...

Joints and joint surfaces
When assembling, mating joints must be dry, unless the condition of the joint surfaces during assembly is specifically indicated. When assembling, install only the gaskets provided for by the design....

Locking parts of connections
General information Always replace locking parts with absolutely identical ones. Lock washers Always fold back the locking edges of the washers and install new washers. Reuse of flap washers is...

Parallel Thread Parts
Vehicles use parts with metric threads in accordance with ISO standards. Nuts, bolts and screws with damaged threads must be replaced with new ones. Driving a damaged thread with a die or tap will...

Bolt designations
All bolts or screws with ISO metric threads made of steel and with an outer diameter greater than 6 mm have the ISO M or M designation stamped on the head of the bolt. In addition to the...

Nut designation
Nuts with metric ISO threads and having a strength index of 8, 12 or 14 are indicated by applying the index to one of the ends of the nut or to one of the faces of the hexagon. Some nuts that have a...
There is 1 a comment

Flexible pipes and hoses
General information When removing and installing flexible pipes and hoses, follow the instructions below. This is a guarantee of reliable and durable operation. Before removing the brake hoses or...

Using Roller Road Test Stands
General information ATTENTION: If possible, use a roller stand to check the braking forces of all four wheels at the same time. The front and rear wheels cannot be independently driven due to the...