CAUTION: When working on SRS harnesses, follow these instructions:
- Do not modify, add to, or otherwise repair the SRS harnesses.
- Do not install potential sources of electromagnetic interference (mobile phone, radio station or entertainment equipment) in close proximity to the SRS harnesses. If you need to install such equipment, consult with a specialist.
NOTE: The wires in the SRS harnesses can be identified by the yellow color of the outer insulation (sometimes black insulation with a yellow stripe is used).
CAUTION: After installation, always check that the SRS harnesses are routed correctly. When installing, be careful not to pinch or damage the SRS harnesses. Do not allow connectors to hang loose or SRS components to be installed without being secured to the body. After installing the components, there should be no friction points on the moving parts of the body.
CAUTION: Make sure all SRS cable connectors are properly oriented and secure. Do not let the connectors hang loose.
Comments on this article