Dismantling
1. Remove the front door protective film.
DOORS, Removing the front door assembly to gain access to other components, installing the front door, 5-door plastic front door trim.
2. Disconnect the shoe from the power window motor.
3. Turn away 2 screws of fastening of the mechanism of a window regulator to a door.
4. Release the cable from the door latch.
5. Turn away 5 screws of fastening of the mechanism of a window regulator to a door.
6. Release the cable from the door latch and, moving the electric motor and actuator, remove them from the door opening.
Installation
1. Position the electric motor and power window mechanism in the door opening and attach to the glass.
ATTENTION: It is very important that when installing the power window mechanism, the location of the cable with an anti-noise cover is behind the door upholstery, and the motor cable is behind the glass.
2. Install and tighten the screws securing the power window mechanism to the door.
3. Install the cable in the door latch.
4. Tighten the fixing clips of the power window mechanism to the glass with a torque of 9 Nm.
5. Connect the shoe to the power window motor.
6. Install the protective film on the front door.
DOORS, Removing the front door assembly to gain access to other components, installing the front door, 5-door plastic front door trim.
Comments on this article