Display — navigation system (Freelander 1)

Dismantling

1. Install the LRT-86-009 tool into the slot, make sure each tool is used for the correct slot.

The instrument is marked 'TOP L' and 'TOP R', make sure the markings are on top when removing the display.

2. Pull the display out of the instrument panel.



3. Disconnect the three connector blocks and 2 coaxial wires, remove the display.

4. Press the tabs inward and remove the tool.

Installation

1. Place the display in the instrument panel, connect the connectors and coaxial wires.

2. Slide the display into the instrument panel until it locks into place.

3. Enter the security code, check the operation of the system.