Dismantling
1. Remove the control panel cover.
INSTRUMENTS, REPAIRS, Dashboard cover - models from 04MY.
2. Turn off 2 screws of fastening of the panel of devices to the control panel, release the panel from uvulas of the bottom fastening it and move aside.
3. Disconnect 3 blocks from the instrument panel.
4. Loosen the receiver antenna wire clamp on the back side of the instrument panel mounting bracket.
5. Remove the instrument panel.
Installation
1. Position the instrument panel in place and attach the pads.
2. Position the receiver's antenna wire in the mounting bracket.
3. Install the instrument panel in place and secure it with screws.
4. Establish a cap of the panel of devices.
INSTRUMENTS, REPAIRS, Dashboard cover - models from 04MY.
Comments on this article