Rear right seat — removal and installation (Freelander 1)

Dismantling

1. Remove the 2 Torx bolts securing the seat hinges.

2. Tilt the seat forward and remove the 2 Torx hinge bolts.

3. Remove the seat.

Installation

1. Install the seat in the car and align the hinges.

2. Install the seat hinge Torx bolts and tighten to 25 Nm.

3. Return the seat to its original position.

4. Screw the front Torx bolts into the floor cross member and tighten them to 25 Nm.