Dismantling
1. Remove the dashboard.
INSTRUMENTS, REPAIRS, Dashboard - models from 04MY.
2. Remove the audio system including a radio receiver and a CD player.
ENTERTAINMENT, REPAIRS, Radio/CD Player - models from 04MY.
3. Turn away 4 screws of fastening of the block of management of a heater to the central console.
4. Remove the rotary contactor.
PASSIVE SECURITY SYSTEMS, REPAIR WORK, Rotary airbag system contactor.
5. Disconnect the 4 electrical connectors from the windshield wiper/turn signal stalk switch.
6. Loosen the bolt and remove the wiper/turn signal stalk switch.
7. Turn away 2 screws of fastening of the bottom casing of a steering column and remove a casing.
8. Lower the driver's glove box cover and remove the fuse block cover.
9. Disconnect the 2 electrical connectors from the fuse box.
10. Close the glove box.
11. Take off your watch.
DEVICES, REPAIR WORKS, Watches.
12. Remove the switch of the light alarm system.
CONTROLS, REPAIRS, Switch - alarm - models from 04MY.
13. Remove the upper trim panels from both A-pillars 'A'.
INTERIOR TRIM PARTS, REPAIRS, A-pillar 'A' upper trim panel replacement.
14. Remove the passenger airbag.
PASSIVE SAFETY SYSTEMS, REPAIR WORK, Front Passenger Airbag - for cars of 2004 model year and later.
15. Disconnect the 2 electrical connectors from the control panel cable.
16. Turn away 14 bolts of fastening of the control panel.
17. With the help of a partner, remove the control panel.
NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.
18. Disconnect 4 electric sockets from the panel of switches.
19. Remove the 4 screws from the switch panel support bracket.
20. Remove from the control panel a key of adjustment of external rear-view mirrors, disconnect an electric socket from the key and remove it.
21. Remove the glove box liner and unscrew the 4 screws securing the inner panel.
22. Take out the internal panel of a glove box and remove a lamp in gathering.
23. Remove the passenger's glove box inner panel assembly.
24. Remove the axles of the hinges of the glove box cover and remove the cover.
25. Remove the cruise control system switches assembly from the control panel.
PETROL FUEL SUPPLY, REGULATIONS, Resume Switch (mode activation/deactivation): since May 2004.
26. Carefully release from fastening and remove from the control panel 4 deflectors of the interior ventilation system.
27. Turn away 2 screws of fastening of a latch of a glove box of the driver and remove a latch.
28. Remove the electrical cable of the control panel, having previously remembered its location.
Installation
1. Replace and secure the control panel electrical cable.
2. Install the latch of the glove box, fix it with screws and, if necessary, adjust its position.
3. Install passenger's glove box assembly.
4. Install the deflector on the control panel.
5. Install the cruise control system switches assembly to the control panel.
PETROL FUEL SUPPLY, REGULATIONS, Resume Switch (mode activation/deactivation): since May 2004.
6. Establish a cover of a glove box and an axis of its loops.
7. Connect an electric socket to a key of adjustment of external rear-view mirrors and establish a key in gathering on the control panel.
8. Install the switches on the control panel and connect the electrical connectors.
9. With the help of a partner, install the control panel in the car and tighten the bolts of its fastening with a torque of 10 Nm.
10. Connect the electrical connectors of the control panel cables to the main wiring.
11. Install the driver's airbag.
PASSIVE SAFETY SYSTEMS, REPAIR WORK, Front Passenger Airbag - for cars of 2004 model year and later.
12. Install the A-pillar upper trim panels 'A'.
INTERIOR TRIM PARTS, REPAIRS, A-pillar 'A' upper trim panel replacement.
13. Install the hazard warning light switch.
CONTROLS, REPAIRS, Switch - alarm - models from 04MY.
14. Set the clock.
DEVICES, REPAIR WORKS, Watches.
15. Open the driver's glove box.
16. Install the audio system.
ENTERTAINMENT, REPAIRS, Radio/CD Player - models from 04MY.
17. Replace the fuse box cover and close the glove box cover.
18. Establish the lower casing of a steering column and fix it with screws.
19. Establish the switch of screen wipers/indicators of turn and tighten the screw of its fastening.
20. Connect the electrical connectors to the wiper/turn signal switch.
21. Install the rotary contactor.
PASSIVE SECURITY SYSTEMS, REPAIR WORK, Rotary airbag system contactor.
22. Install the heater control panel on the control panel and secure it with screws.
23. Install the dashboard.
INSTRUMENTS, REPAIRS, Dashboard - models from 04MY.
Comments on this article