Dismantling
1. Raise the front of the car.
WARNING: Do not work on or under a vehicle that is supported only by a jack. Always install safety props.
2. Remove both jacking point covers.
3. Turn away 7 self-tapping screws of fastening of an overlay of a threshold to a body.
4. Release and remove an overlay from a threshold.
Installation
1. Clean the mounting surfaces of the sill trim.
2. Attach the trim to the threshold, find the jacking points and secure the trim with self-tapping screws.
3. Install the jacking point pads.
4. Remove props and lower the car.
Comments on this article