Rear door lock (Freelander 1)

Dismantling

1. Remove the plastic trim on the door panel.

DOORS, Removal of the front door assembly to provide access to other elements, installation of the front door, Rear door plastic trim.

2. Disconnect from the lock draft of the external handle.

3. Disconnect the lock button rod from the door lock.

4. Disconnect the electrical connector from the door lock.



5. Remove the 3 Torx screws securing the lock to the door.

6. Remove the lock assembly from the lock hole.



7. Open the protective cover of the lock.

8. Release the release cable retainer from the lock.

9. Disconnect the release cable from the lock.

Installation

1. Connect the release cable to the lock and close the protective cover of the lock.

2. Install the lock in the door, screw in and tighten the Torx screws.

3. Connect the electrical connector to the lock.

4. Connect the outer handle rod to the lock.

5. Connect the lock button rod to the lock.

6. Check how the lock works.

7. Install the door panel plastic trim.

DOORS, Removal of the front door assembly to provide access to other elements, installation of the front door, Rear door plastic trim.