Specification (Discovery 3)

Starter 4.0L

Position	Specification
Starter motor:
brand	Denso
Type	RA - with pre-engagement
Voltage	12
Current consumption	1.8 kW

Torque specifications 4.0L

Name	Nm	lb-ft
* Starter positive terminal nut	10	7
Starter mounting bolts	45	33
** Bolt of fastening of the lower universal joint of a steering column	25	18
Nuts and bolts of the heat shield of the upper suspension arm and brake pipeline	10	7

CAUTION: * Exceeding the specified torque will damage the internal connections

** Requires installation of a new encapsulated bolt.

Starter 4.4L

Position	Specification
Starter
brand	Denso
Type	RA - with pre-engagement
Voltage	12
Current consumption	1.8 kW

Torque specifications 4.4L

Name	Nm	lb-ft
* Screw "positive" starter terminals	10	7
Starter mounting bolts	45	33
** Bolt of fastening of the lower universal joint of a steering column	25	18
Tie Rod Heat Shield Nuts and Bolts	10	7

CAUTION: * Exceeding the specified torque will damage the internal connections

** Requires installation of a new encapsulated bolt
+ New nut required.

Starter 2.7L

Position	Specification
Starter:
brand	Denso
Type	P76S - with pre-engagement
Voltage	12
Current consumption	2.0 kW

Torque specifications 2.7L

Name	Nm	lb-ft
Starter mounting bolts	48	35
* Built-in connector nut "positive" battery terminals	11	8
* Solenoid terminal built-in connector nut	7	5
Starter bracket mounting bolts	10	7
Bolts of fastening of an arm of the fuel filter	10	7
Bolts of fastening of a cooler of fuel	10	7

Attention! * Exceeding the specified torque will damage the internal connections.