Refueling volume
| Fuel tank | 84.0 l (18.5 gallons) (22.19 US gallons) |
General specification
| Name | Specification |
| System type | Mechanical - irrevocable |
| fuel pump module | Located in the fuel tank |
| High pressure fuel pump: | |
| Location | Located at the rear of the engine between the cylinder heads, belt driven by camshafts |
| Max working pressure | 165000 kPa (1650 bar) (23925 psi2) |
| Fuel pump: | |
| Location | Located in the fuel tank |
| Operating pressure | 50 kPa (0.5 bar) (7.35 psi2) |
| Maximum performance at 12.3V | 70 l/h (15.4 gal/h) (18.4 US gal/h) |
| Fuel pressure control: | |
| Type/Location | Built-in, inside the fuel tank |
| Operating pressure | 50 kPa (0.5 bar) (7.25 psi2) |
| Fuel filter | Remote type, located on the inside of the longitudinal beam, has a replaceable filter element and a moisture separator with a capacity of 178 cubic meters. cm (6 fl oz) |
| Fuel gauges | Two sensors - front and rear. Front sensor remote type, installed in the fuel tank; the rear sensor is located in the fuel pump housing |
Torque Specifications
| Name | Nm | lb-ft |
| Fuel tank bracket bolts | 10 | 7 |
| Fuel pump module clamp screw | 4 | 3 |
| Fuel tank bolts | 45 | 33 |
| Fuel tank heat shield bolts | 5 | 4 |
| Fuel tank heat shield nuts | 3 | 2 |
| Bolt of fastening of the fuel filter to a basic arm | 10 | 7 |
| Gearbox protection bolts | 10 | 7 |
Comments on this article