Rear exhaust pipe 2.7L (Discovery 3)

Special tool

Exhaust pipe cutter 100-051 (LRT-99-027)

Removing

1.

WARNING: It is forbidden to carry out work on a vehicle standing on only one jack. Always support the vehicle with jack stands.

Raise and support the vehicle.

2. Remove the exhaust pipe.

• Using 100-051, cut off the exhaust pipe at the location indicated by the dimple on the exhaust pipe.
• Disconnect the exhaust pipe from its mounting.

Installation

1.

NOTE: Do not tighten the clamp at this stage.

Install the exhaust pipe.

• Clear the details.
• Install clamp.

2. Align the exhaust pipe and tighten the clamp (tightening torque 55 Nm).