4.4L engine coolant level sensor (Discovery 3)

Removing

1. Release the power steering reservoir from the bracket.



2. Disconnect the filler neck of the washer reservoir.



3. Reinstall the expansion tank. Turn out two bolts.



4. Remove the coolant level sensor. Disconnect the coolant level sensor electrical connector.

Installation

1.

NOTE: A click will be heard when the coolant level sensor is properly installed.

Install the coolant level sensor. Connect the electrical connector of the coolant level sensor.

2.

CAUTION: Position the element correctly on the dowel pins.

Fix a broad tank of system of cooling. Tighten the bolts (tightening torque 10 Nm).

3. Reinstall the filler neck of the windshield washer reservoir.

4. Attach the power steering reservoir to the bracket.