WARNING: For heavy duty vehicles, the following maintenance operations must be carried out every 3 months or 6000 km.
1. Check the front pad wear. For more information refer to Specifications (206-03 Front Disc Brake).
2. Check the rear pads for wear. For more information refer to Specifications (206-04 Rear Disc Brake).
3. Check for signs of brake fluid leaks from the calipers.
4. Check the condition of the brake discs.
5. Check the condition of all pipelines and hoses of the brake booster and brake system for abrasions and leaks.
6. Clean the centering shoulders of the wheel hubs and apply grease (Part No. Land Rover RYL 105020) on the seating surface of each centering shoulder on the wheel.
7. Vehicles with tires with a unidirectional tread pattern: Install the wheels on their respective hubs, making sure the wheel is in the same position with respect to the hub as it was before removal.
8. Vehicles with non-directional tires: Install the wheels on the opposite side of the vehicle, making sure they remain on the same axle.
9. Install and tighten wheel nuts (tightening torque 140 Nm).
WARNING: For heavy duty vehicles, the next maintenance operation must be carried out every 2 years or 48,000 km.
10. Every 3 years or 72,000 km: Change the brake fluid. For more information refer to Brake System Bleeding (206-00 Brake System - General Information). For more information refer to Brake System Pressure Bleeding (206-00 Brake System - General Information).
11. Every 6 years or 144,000 km: Replace all flexible brake hoses.
Electronic parking brake
WARNING: For heavy duty vehicles, the following maintenance operations must be carried out every 3 months or 6000 km.
1. Check the electronic parking brake setting. For more information refer to Parking Brake Shoe and Lining Adjustment (206-05 Parking Brake and Actuation).
2. Heavy Duty Vehicles: Check the condition of the electronic parking brake.
Comments on this article