| Item name | Spare part number | Description |
| 1 | - | Rotary switch system "Terrain Response" |
| 2 | - | Transfer Case High/Low Switch |
| 3 | - | Air suspension switch |
| 4 | - | System control unit "Terrain Response" |
| 5 | - | Special programs disabled |
| 6 | - | Program "Grass/gravel/snow" |
| 7 | - | Program "mud/ruts" |
| 8 | - | Program "Sand" |
| 9 | - | Program "Slow movement on a rocky surface" |
| 10 | - | HDC switch |
Rotary switch system "Terrain Response" located on the center console and allows you to select one of the five work programs. Each program corresponds to a symbol depicting a view of the area. Turn the rotary switch to select the required program. The switch selects only the last program in the direction of rotation. Once the last program in either direction is selected, further rotation of the switch will have no effect. For example, after choosing a program "Slow motion on rocky terrain" further counterclockwise rotation will have no effect.
System control unit "Terrain Response" located under the rotary switch. The unit is connected with a harness connector which also contains the wiring for the HDC switch,
transfer case high/low switch, air suspension switch, and switch illumination circuits. The control box and switch use four wires from the harness to supply 12V from the battery when the ignition key is in position II, ground, and high speed CAN bus positive and negative signals.
Comments on this article