NOTE: Automatic transmission model shown, manual transmission model is similar.
| Item name | Spare part number | Description |
| 1 | - | Chassis inner cross member |
| 2 | - | brake pedal buffer |
| 3 | - | Stoplight switch |
| 4 | - | Brake pedal |
| 5 | - | Pin with hole cap and cotter pin |
| 6 | - | brake pedal bracket |
The brake pedal is attached to a bracket mounted on the rear side of the bulkhead of the engine compartment. On left-hand drive manual transmission models, the brake pedal uses the same bracket and pivot bolt as the clutch pedal. On right-hand drive and manual transmission models, a separate bracket is used for the brake pedal. A pin with a head with a hole and a cotter pin connect the brake pedal to the brake booster rod. The brake pedal buffer is mounted on the inner cross member of the chassis to limit rearward movement of the brake pedal in the event of an accident.
The brake light switch is mounted on the brake pedal bracket and is actuated by the brake pedal. For more information refer to Anti-Lock Control - Traction Control (206-09A Anti-Lock Control - Traction Control)
Comments on this article