Repair of car front elements Land Rover Discovery 3

Specification
Torque specification Description Nm lb-ft Air deflector bolts 10 7 Hood Latch Torx Bolts 10 7 Bonnet panel bolts 25 18 Bolts of fastening of a broad tank of system of cooling 10 7

Rear fender apron reinforcement section
Removing 1. Disconnect both wires from the battery. For more information refer to Specification. 2. Remove the front fender. For more information refer to Wing (76.10.24) 3. Left side: Remove the...

Fender Apron Panel Cover
Removing NOTE: This procedure replaces the wing apron trim panel along with the wing apron panel or wing apron panel reinforcement. 1. Disconnect both wires from the battery. For more information...

Sheet metal elements of the front
Technological panels of the front part of the body Name Description Part number according to the repair catalog 1 Decorative wing apron panel. R/H ABD780100 L/H ABD780110 2 Wing apron panel...

Hood latch panel
Removing NOTE: If the cover on the hood latch panel is damaged or scratched, it must be repaired with the recommended compound. For more information refer to Specification. 1. Disconnect the wire...

Wing apron panel
Removing 1. Disconnect both wires from the battery. For more information refer to Specification. 2. Remove the front fender. For more information refer to Wing (76.10.24) 3. Remove the hood latch...

Front spar
Removing NOTE: This procedure requires the body to be removed from the body frame. NOTE: This procedure replaces the front side member along with the hood latch panel, front wheel arch and front...

Front cross member
Removing 1. Disconnect both wires from the battery. For more information refer to Specification. 2. Remove the hood latch panel. For more information refer to Hood Latch Panel (76.16.22) 3. Remove...

Front wheel arch
Removing NOTE: This procedure requires the body to be removed from the body frame. NOTE: This procedure replaces the front wheel arch along with the front side member, hood latch panel and front...

Front reinforcement section of the fender apron panel
Removing NOTE: This procedure replaces the front wing apron trim panel reinforcement along with the wing apron trim panel. 1. Disconnect both wires from the battery. For more information refer to...

Wing Apron Panel Section
Removing 1. Disconnect both wires from the battery. For more information refer to Specification. 2. Remove the front fender. For more information refer to Wing (76.10.24) 3. Remove the hood latch...

Front spar section
Removing NOTE: This procedure requires the body to be removed from the body frame. NOTE: This procedure replaces the front side member section along with the hood latch panel, front wheel arch and...

Front wheel arch section
Removing NOTE: This procedure requires the body to be removed from the body frame. NOTE: This procedure replaces the front wheel well section along with the front side member section, hood latch...

Wing apron panel reinforcement
Removing NOTE: This procedure replaces the fender apron reinforcement along with the fender apron trim panel. 1. Disconnect both wires from the battery. For more information refer to Specification....

Strengthening the front wheel arch
Removing NOTE: This procedure replaces the front wheel arch reinforcement along with the front side member and front wheel arch. 1. Disconnect both wires from the battery. For more information refer...